CL200 automatic touchless car wash
CL200 operates at low pressure and uses two cleaning products, including one for a wax treatment. It offers four programmes and has four built-in dryers to complete the cycle.
At a glance
- Pressure levels
- Low
- Number of cleaning products
- 2
- Programmes
- 4
- Built-in dryers
- 4
- Whole-machine warranty
- 1 year
When to choose this model
Washing, wax treatment and drying
Choose CL200 for an automatic wash that includes a wax treatment and drying. Compared with CL100, it adds a second cleaning product and four built-in dryers.
CL200 operates at low pressure. For high pressure, chassis and wheel rim washing or intensive front and rear washing, consider CL300.
Features and programmes
CL200 combines low-pressure washing with a wax treatment and drying. For chassis and wheel rim washing, discuss the required configuration with Washbot.
- Pressure levels
- Low
- Number of cleaning products
- 2
- Programmes
- 4
- Built-in dryers
- 4
- Chassis and wheel rim washing
- Check with Washbot
- Intensive front and rear washing
- Check with Washbot
- Separate water and foam lines
- No
- Remote control
- Yes
- Distinctive features
- Wax treatment and drying
Technical data
Water and electricity use and programme times are based on the manufacturer's data. Values depend on the selected programme and how dirty the car is.
- Water use per cycle
- 60–100 l
- Electricity use per cycle
- 0.3–1.2 kWh
- Programme duration
- 3–8 min
- Whole-machine warranty
- 1 year
Manufacturer's data
The machine requires a three-phase 380 V supply. The connected load depends on the model and configuration and is confirmed at the site survey.
The machines are made by Shenyang Cheer Wash. The company reports two production facilities with a combined area of 30,000 m² and more than 7,000 machines in operation worldwide.
Wash bay requirements
A standard CL200 installation requires a wash bay measuring 6.80 × 3.65 × 3.00 m. Maximum vehicle dimensions are 5.60 × 2.60 × 2.00 m. All dimensions are length × width × height.
| Configuration | Standard installation without an additional crossbeam | Maximum vehicle dimensions |
|---|---|---|
| Standard configuration | 6.80 × 3.65 × 3.00 m | 5.60 × 2.60 × 2.00 m |
These dimensions are a guide for planning. We confirm the final installation requirements at the site survey, based on the model, equipment and site structure.
What your quote includes
We prepare a quote for your site, setting out the configuration, optional equipment and the site preparation required.
- Configuration and optional equipment
- Site preparation
- Price for your configuration
Installation, warranty and service
- Whole-machine warranty
- 1 year
CL200 comes with a one-year whole-machine warranty.
Installation and commissioning take 1–3 weeks after the site is prepared.
If you have a technical problem, we respond and start remote diagnostics within the same working day. If a technician needs to visit, we confirm the timing after diagnostics, based on the site location and the parts needed.
We keep spare parts in stock in Bulgaria. If a rarer or major component is needed, Washbot arranges its delivery and the repair.
For a confirmed manufacturing defect, the warranty covers the required spare part and labour for diagnostics and repairs. We carry out remote diagnostics first. If a visit in Bulgaria is needed for a confirmed warranty defect, Washbot covers the technician and travel costs.
Your individual quote includes the full warranty terms.
Questions about CL200
- What pressure levels does CL200 use?
- Low
- How many cleaning products does CL200 use?
- 2
- Does CL200 have built-in dryers?
- 4
- How much water does CL200 use per cycle?
- 60–100 l
- What is the warranty for CL200?
- 1 year